pneumatic ATEX Certified Landfill Leachate Pumps

Viridian Systems Ltd


	VP Range of Pumps

On-Line Orders Click Here


	VP Range of Pumps

	Viridian Systems Ltd. manufactures the very successful range of VP pneumatic borehole pumps in two basic sizes, namely the VP3 & VP4, for most landfill applications The VP 3 & 4 are intended for 3” & 4” wells respectively. The VP range is a cost effective, ATEX certified, reliable, automatic and long lasting solution to Leachate and condensate control problems within the landfill industry. VP pumps are fully automatic, self-regulating and require no external form of actuation. VP Pumps come with a 1-year Warranty on parts and labour excluding normal wear and tear.




			ATEX Certificate .pdf





		Pump Animation see how it works here


	The range of pumps is as follows

Model & Type:

VP4-B

VP4-T

VP4-BLDD

VP3-B

VP3-T

VP3-LDD

Liquid inlet position:

Bottom

Top

Bottom

Top

Bottom

*Max flow rate: litres\Hour

>2,880

>2,100

>1,200

>1,500

>1,100

>850

Volume\cycle: Litres

0.9-1.1

0.5

0.6

0.35

Pump Length Overall: mm

1,030

1,100

550

1,120

1,190

665

Weight: Kg

7.5

6.7

7.2

3.2

Pump diameter: mm

Pump trigger point: mm

670

1,060

360

744

1,090

360

Min internal well dia: mm

100

**Max working depth: m

130

Max operating temp:⁰C

100

pH operating range:

1-12

1.12

Performance Chart

* The pumping rates quoted in the table are maximum values attained under specific set of optimum conditions

** The maximum working depth is dependant upon compressed air pressure

Schematic drawing showing typical VP4 or VP3 pneumaticpump installation:

Typical Installation Detail

VP Pump Construction & Operation

Click Here

VP Pump Installation Guide

Click Here

Pump Tubes

Wellhead

Tubes Side

The VP range has a pump to suit most requirements from the standard VP4 bottom entry to a top loading version, a narrow VP3 to the short pattern VP4 for those situations where you are trying to achieve as low a depth as possible. The pumping rates vary from well to well and the graph gives an indication of the performance.

Suitable for insertion into

Leachate Wells
Gas and Leachate Wells
Condensate Knock out pots

The flow rates generated by the VP range of pumps is governed by

Depth of well
Pipework design of both the Air main and Leachate Discharge main
Recharge rate of the well
Relative Air pressure
Height of liquid above the pump inlet

We have a modern well equipped workshop where we carry out maintenance, service and product developments. This facility houses our fabrication department where we manufacture Well heads for both Leachate and Gas wells, manifolds and Knock out pots. These are either to our own or customers designs.

We have installed and maintained Leachate pumps and systems for most of the major UK Landfill operators.


	Pneumatic Leachate Pump, Pneumatic Landfill Pump, Landfill Pump, Leachate Pump, Pneumatic Bottom Loading Pumps, Pneumatic Top Loading Pumps, Viridian Pump, ATEX Pump, Pneumatic ATEX Pump, ATEX Leachate Pump, ATEX Landfill Pump, EX Pump, Total Fluids and Landfill Leachate Pump, Total Fluids Pump, Lixiviado, Sickerwasser


	[Search] [Pneumatic] [Bio Filters] [Methane Stripping Plants] [Landfill Monitoring] [Catalogues] [Electric Pumping Systems] [System Maintenance] [Fabrications] [Camera Survey] [Landfill Gas Systems] [Leachate Storage] [Compressor Packages] [Landfill Gas Systems] [System design & Installation]


	All rights reserved Viridian Systems Ltd (C)Copyright 2008